Pluto Cartridge MKIII Lab1Pluto Cartridges
Pluto Cartridge MKIII Lab1
Moving coil cartridge "pluto one"
This cartridge bellongs to the very top when it comes to true-to-life rendering of signals from record to amplifier. the composition of materials such as titanium off materials such as titanium, monocrystal goldwire, boron, carbon compound, resig composite and v/d Hul tip nr. 1S provide a fafourable energy transformation.
| Cartridge type
|
Pluto Cartridge MKIII Lab1
|
Unit
|
| Stylus Shape | VDH-IS | |
| Stylus Radii | 2X85 | Micron |
| Frequency Range | 5-65.000 | Hz |
| Tracking Force | 12-14 | mN |
| Static Compliance | 35 | Micron/mN |
| Tracking Ability at 15 mN at 315 Hz | 70 | Micron |
| Output Voltage at 1 kHz at 5,7 cm/s eff. | 2.25 | mV RMS |
| Channel Unbalance | <0.5 | dB |
| Channel Seperation at 1 KHz/10kHz | >30/>28 | dB |
| Equivalent Stylus Tip Mass | 0.32 | Milligram |
| System Weight | 12 | Gram |
| Vertical Tracking Angle | 22 | Degrees |
| Recommended Load Impedance | 47k | Ohm |
| Recommended Eff. Tone arm Mass | 6-10 | Gram |